New Possibilities for OLED Based on a Single-Molecule LED

Research by Gaël Reecht, Fabrice Scheurer, Virginie Speisser and et al from University of Strasbourg, France luminescence can be achieved by a single polymer molecule, which could be the smallest possible OLED device, according to Physic Review article. Below is the synopsis for the report on Physical Review Letters by Don Monroe :

“Transforming electrical current into light is critical for technologies such as telecommunications and displays. In Physical Review Letters, researchers report luminescence from a single polymer molecule, representing the smallest possible OLED device.

To electrically connect to an individual polymer molecule, Gaël Reecht of the University of Strasbourg, France, and his colleagues used a gold-coated scanning tunneling microscope tip to identify and then grab one end of a single polythiophene molecule lying on a gold substrate. When they pulled back the tip and applied a voltage, they measured a nanoampere-scale electrical current running between the tip and substrate through the polymer, which was held at just a few kelvins. As long as the voltage was large enough, the energy spectrum of the emitted light didn’t change, leading the researchers to conclude the light emerges when electrons jump between intrinsic energy levels of the polymer, not those of the metal electrodes.

Still, the light emission was strongly enhanced by the sloshing it generated in nearby electrons in the gold tip and surface. When the tip had a large negative voltage, a photon emerged for every 100,000 electrons that entered the molecule from the tip. But with the opposite polarity, the team suggests that the molecule’s stronger electrical connection to the substrate keeps the relevant molecular level too high in energy to be populated from that side. The observed 10,000-fold asymmetry is reminiscent of that in commercial OLED devices, but on a vastly smaller scale. ”

Disclaimers of Warranties

1. The website does not warrant the following:

1.1 The services from the website meets your requirement;

1.2 The accuracy, completeness, or timeliness of the service;

1.3 The accuracy, reliability of conclusions drawn from using the service;

1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website

2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<

Proprietary Rights

You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.